BIG BLOCK CHEVY 572 580 588 598 SHORT BLOCK

CHECK OUT OUR WEB SITE WWW.CNC-MOTORSPORTS.COM OR CALL US TOLL FREE WITH ANY QUESTION YOU MAY HAVE.

Looking for Professional quality and Reliable Performance? CNC-Motorsports will give you just that!

Here at CNC-Motorsports our short blocks start with new Dart Tall Deck Big M sportsman block. We start by seasoning the new Dart block, we run each block threw 7 to 10 heat cycles before we do any machine work. New blocks have a tendency to change .001 to .002 thousands after the heat cycles are complete. All blocks are checked and then line honed if needed to get a baseline for all of the BHJ blueprinting fixtures. From this point we square up the decks using BHJ’s Blok-Tru to get the desired deck heights. Once this is done we bore the block using BHJ’s Bore-Tru to get the desired spacing.

The next step is the honing process. We install main caps and torque plates to ensure cylinder bores ends up as true to actual running conditions as possible. In our honing process we aim for around 30º crosshatch to achieve the most compression while still allowing the rings to travel. Bores are measured with plates still attached and recorded on the blue print sheet.



Once all the machine work is completed, the block is washed and prepped for assembly. During the assembly process, all components are measured and corrected to obtain correct clearances. All of these measurements are recorded on the blueprint sheet.



Rotating assemblies in these short blocks are all weight matched within +/-2 grams, and the crankshaft is balanced with in ½ of a gram.

Here at CNC Motorsports we strive for excellence in our craftsmanship to provide our customers with the best possible product money can buy



Big Block Chevy Short Block Assembly




New Scat/Eagle 4340 forged steel crankshaft

New Scat/Eagle H-Beam connecting rods ( Bushed Fit Pins )

New SRP forged high performance aluminum pistons, with pins and locks

High performance plasma moly piston ring set


ACL/Clevite 77 Rod & Main Bearings

Dura Bond Cam Bearings

Dura Bond Finishing Kit

Freeze Plugs

Victor Reinze Rear Main Seal

New Dart Big M Sportsmen Tall Deck Block – Has 3 Centered 4 Bolt Splayed Caps

Total Seal Gapless Top Rings (add $ 170.00)
TriArmor Coated Bearings (add $ 140.00)
ARP 2000/L19 Rod Bolt Upgrade (add $ 90.00)
Dart Big M Competition Block (add $ 425.00)

This item is NEW

Trades NOT ACCEPTED

Payment options:

Item Location: BROOKINGS, SD Get Directions To This City

This ad expires in 38 days.